The next hazardous waste shipment is scheduled for January 29.
Please have your inventory to Mary Duda by Friday, January 17.
As always, we will be around a few days before the pickup, the week of January 20, to pick up your waste so we can have it ready for shipment the following week.
Please contact Mary Duda or John Baxter with any questions.
Hazardous waste labels
Hazardous Waste Information
What is hazardous waste?
Hazardous waste is a waste with properties that make it dangerous or potentially harmful to human health or the environment. In regulatory terms, a RCRA hazardous waste is a waste that appears on one of the four hazardous wastes lists (F-list, K-list, P-list, or U-list), or exhibits at least one of four characteristics—ignitability, corrosivity, reactivity, or toxicity. Most of our wastes at Creighton are "characteristic" wastes. Hazardous waste is regulated under the Resource Conservation and Recovery Act (RCRA) Subtitle C.
More information can be found on the EPA's Hazardous Waste information site.
Please note that bottles that contained P-listed chemicals are also considered to be hazardous waste and must be disposed of as such. Common P-list lab chemicals include sodium azide, potassium ferricyanide, nicotine, 2,4-dinitrophenol, potassium cyanide (and other cyanide compounds). Please see the Electronic Code of Federal Regulations for complete details. The link may change so please see 40 CFR §261.33 if necessary. The University of Oklahoma Health Sciences Center keeps a good list that also explains the necessity of disposing of the empty containers properly.
Hazardous waste is picked up on a quarterly basis, in February, May, August, and November. As always, your waste inventories will be due approximately 1 1/2 weeks prior to the pickup , and we will be around the week before the actual pickup date to collect your waste.
Notices of pickup dates will be posted on Jaynet-news, Creighton Today, and in the halls of the science buildings. Additionally, an email is sent to people wishing to be informed of this and other chemical issues. Please contact Mary Duda to be added to that list. EH&S personnel will be around the week before the scheduled pickup to collect your waste for labpack by the waste contractor.
A few things to keep in mind about hazardous waste:
All containers must be labeled with the following information
- The words "Hazardous Waste"
- Contents of the container (in words). If there are multiple components, list by percentage or volume
- Hazards of the contents
- Dates that you started and finished filling the container
- Name/location of generator
Labels are available here for your convenience (Word document). They can be printed on to standard Avery labels or plain paper and attached to your bottles.
Waste containers must be closed except when material is being added. This includes HPLC machines. Parafilm is not considered an appropriate lid for containers.
Keep hazardous waste in a specially designated area that is not on the floor. Consider using secondary containment -- place your waste bottles in a storage bin or a tray with a lip around the edge. This will contain your waste in the event of a spill or broken bottle.
Make sure a proper lid is always on the container, except when filling it.
Hazardous waste disposal is at no cost to generators
The Department of Environmental Health and Safety is pleased to announce that it will no longer be charging generators for their hazardous waste shipments. Please understand, however, that in cases of willful neglect, hoarding, or materials that are extremely difficult to dispose properly, charges may still apply. A document outlining these special circumstances is available here.
This only applies to chemical hazardous waste; individual departments will continue to contract directly with Stericycle for medical and/or biohazardous waste disposal.
Hazardous waste disposal charges are not cheap; care must be taken to include these charges in your budgets. One way to reduce these charges is to order less to begin with. While it may seem more economical at first to order the 4L bottle instead of the 1L bottle, it may wind up being much more expensive in the long run. Determine how much of a substance you will actually use in your research, and only order as much as you will need. Excess can be placed in our "chem exchange," but if no one wants it, it remains your problem to dispose of it. Try to find less hazardous alternatives, if possible.
- The American Chemical Society's publication Less is Better gives further details on minimizing your waste.
- Laboratory Waste Minimization and Pollution Prevention by Battelle Seattle Research Center. A handy online review, covering everything from buying and storing chemicals, to techniques to consider during the running of experiments, to reuse and recycling of materials.
- The University of Illinois at Urbana-Champaign has several fact sheets on Waste Minimization, available as pdf or html files.
- Is microscale chemistry for you? Check out the National Microscale Chemistry Center and see if this is something you can apply in your laboratory.
- An Organizational Guide to Pollution Prevention put out by the EPA (pdf).
Check out the EPA's Enforcement Alert regarding the management of Laboratory Waste.
Check out our new webpage discussing planning ahead when purchasing chemicals. There are tips regarding items that may be expensive or difficult to dispose of.